Choose a model by boosting level, duty point, power supply and pipe size
Four steps decide most selections: the duty point, the water source, the power supply, and the control and power stage. The guide covers flows from 25 L/min to 500 L/min and heads from 25 m to 75 m, plus pipeline boosting for DC duty.
- 1
Duty point — required head = lifting height + pipework loss + target outlet pressure (2 bar ≈ 20 m); match to a boosting level.
- 2
Water source — mains or rooftop tank suits a standard booster; sump or well below the pump calls for self-priming ICP100F (8 m) or ICP106F (9 m); pH 6.5–8.5, particles below 0.2 mm; liquid max. 70 °C (55 °C for PYS-E/PYPZ-E), ambient max. 40 °C.
- 3
Power supply — standard single-phase 170–250 V, 50/60 Hz (PB320EA 160–265 V); PYS-E/PYPZ-E customizable 110 V/60 Hz or 170–220 V.
- 4
Control and power stage — ICP100F/ICP106F hold constant pressure across 10–30 m; 6 five-stage models (SPS-90, SPS90-3, SCS90P-3, SCS100P-3, ICP100A, ICP102-50); PB320EA has 3 power settings; dry-run, overload and fault alarm self-check.
By required flow and head
Maximum flow and maximum head from the 2026 catalog tables, with the boosting level each model belongs to. Select the model whose curve covers your duty point at the required outlet pressure.
Catalog duty range by model
| Model | Boosting level | Maximum flow | Maximum head | Power range | Power supply | Pipe size | Quote |
|---|---|---|---|---|---|---|---|
| MT24-25 | Pipeline boosting | 25 L/min (1.5 m³/h) | 25 m (82 ft) | 0.2 kW (0.27 HP) | DC 24 V | 15 mm | Request a Quote |
| ISC-200 | Pipeline boosting | 25 L/min (1.5 m³/h) | 25 m (82 ft) | 0.2 kW (0.27 HP) | DC 24 V | 15 mm | Request a Quote |
| ISC2-200 | Pipeline boosting | 25 L/min (1.5 m³/h) | 25 m (82 ft) | 0.2 kW (0.27 HP) | DC 24 V | 15 mm | Request a Quote |
| PB320EA | Level 1 | 46 L/min (2.8 m³/h) | 32 m (105 ft) | 0.09 - 0.14 kW (3 power settings) | 160 - 265 V, 50/60 Hz | 3/4" (19 mm) | Request a Quote |
| Z400 | Level 2 | 58 L/min (3.5 m³/h) | 50 m (164 ft) | 0.4 - 0.75 kW (0.55 - 1 HP) | 170 - 260 V, 50/60 Hz | 1" (25 mm) | Request a Quote |
| SPS-90 | Level 1 | 60 L/min (3.6 m³/h) | 32 m (105 ft) | 0.18 - 0.38 kW (0.25 - 0.5 HP) | 170 - 250 V, 50/60 Hz | 3/4" (19 mm) | Request a Quote |
| SPS90-3 | Level 1 | 70 L/min (4.2 m³/h) | 45 m (148 ft) | 0.27 - 0.58 kW (5-stage adjustable) | 170 - 250 V, 50/60 Hz | 1" (25 mm) | Request a Quote |
| P800-3 | Level 2 | 72 L/min (4.3 m³/h) | 56 m (184 ft) | 0.75 kW (1.0 HP) | 170 - 260 V, 50/60 Hz | 1" (25 mm) | Request a Quote |
| SCS90P-3 | Level 1 | 75 L/min (4.5 m³/h) | 45 m (148 ft) | 0.24 - 0.47 kW (5-stage adjustable) | 170 - 250 V, 50/60 Hz | 1" (25 mm) | Request a Quote |
| PYS-E | Level 2 | 82 L/min (4.9 m³/h) | 56 m (184 ft) | 0.45 - 0.75 kW (0.6 - 1 HP) | Customizable: 110 V / 60 Hz, or 170 - 220 V / 50 Hz or 60 Hz | 1" (25 mm) | Request a Quote |
| PYPZ-E | Level 2 | 85 L/min (5.1 m³/h) | 55 m (180 ft) | 0.45 - 0.75 kW (0.6 - 1 HP) | Customizable: 110 V / 60 Hz, or 170 - 220 V / 50 Hz or 60 Hz | 1" (25 mm) | Request a Quote |
| ICP100F | Level 1 | 86 L/min (5.2 m³/h) | 38 m (125 ft) | 0.75 kW (1.0 HP) | 170 - 250 V, 50/60 Hz | 1" (25 mm) | Request a Quote |
| ICP106F | Level 1 | 86 L/min (5.2 m³/h) | 42 m (138 ft) | 0.75 kW (1.0 HP) | 170 - 250 V, 50/60 Hz | 1" (25 mm) | Request a Quote |
| ICP100A | Level 1 | 102 L/min (6.1 m³/h) | 38 m (125 ft) | 0.3 - 0.75 kW (0.4 - 1 HP) | 170 - 250 V, 50/60 Hz | 1" (25 mm) | Request a Quote |
| SCS100P-3 | Level 2 | 165 L/min (9.9 m³/h) | 75 m (246 ft) | 0.55 - 1.5 kW (5-stage adjustable) | 170 - 260 V, 50/60 Hz | G 1.25" (32 mm) | Request a Quote |
| SG95 | Level 2 | 178 L/min (10.7 m³/h) | 73 m (240 ft) | 0.55 - 1.5 kW (0.75 - 2 HP) | 170 - 260 V, 50/60 Hz | 1" / 1.25" (25 / 32 mm) | Request a Quote |
| ICP102-50 | Level 3 | 500 L/min (30.0 m³/h) | 28 m (92 ft) | 0.35 - 1.5 kW (0.48 - 2 HP) | 170 - 250 V, 50/60 Hz | 2" (51 mm) | Request a Quote |
Swipe the table sideways to see every column.
170–250 V, 50/60 Hz standard, except PB320EA 160–265 V, SCS100P-3 / SG95 / Z400 / P800-3 170–260 V, P800/1500 motor 175–260 V; PYS-E/PYPZ-E customizable 110 V/60 Hz or 170–220 V; DC 24 V range with AC 110/220 V adapter.
15 mm: MT24-25, ISC-200, ISC2-200 · 19 mm (3/4"): SPS-90, PB320EA · 25 mm (1"): SPS90-3, SCS90P-3, P800-3, Z400, ICP100A, ICP100F, ICP106F, PYS-E, PYPZ-E, SG95-550A, SG95-550S, SG95-650S · 32 mm (1.25"): SCS100P-3, SG120B-1.1, SG120B-1.5 · 51 mm (2"): ICP102-50.
Suction lift: ICP100F 8 m; ICP106F 9 m; Z400 9 m; PB320EA 6 m; SCS90P-3 / SCS100P-3 / P800-3 7 m; SPS-90 / SPS90-3 / ICP100A 7 m. Not stated for SG95.
P800/1500 is a permanent magnet motor only, for pump manufacturers. See D group.
What to check before ordering
Duty point · water source · water quality · voltage · pipe size · environment · quantity/port.
Send the duty point and get a model recommendation
Share the required flow and head, the water uses on site, the voltage and frequency, and the order quantity. The export team will confirm the boosting level, the model, the power setting and the matching documents.
- Sales & Export
- cason@calliopepump.com
- After-sales
- corleone@calliopepump.com
- Head Office
- office@calliopepump.com
- Phone / WhatsApp
- +86 178 0591 6566