2026 catalog · SCS100P SERIES
SCS100P-3Permanent Magnet Variable Frequency Multistage Stainless Steel Pump
The SCS100P-3 is the tallest-reaching pump Calliope makes: five stages from 0.55 to 1.5 kW lift water to 75 m, the highest in the range, at 115 to 165 L/min. It is also the largest multistage pump by flow, moving over double the SCS90P-3's 75 L/min through G 1.25-inch ports. Body, impeller and shaft are 100% stainless steel, with a ceramic shaft and bearing, and outlet pressure can reach inlet pressure plus 3.8 bar. Two buttons run it: the pump starts and stops itself as the household draws.
- Rated power
- 0.55 - 1.5 kW (5-stage adjustable)
- Maximum flow
- 165 L/min
- Maximum head
- 75 m
- Power supply
- 170 - 260 V, 50/60 Hz
- Catalog page
- Page 13
Key benefits
SCS100P-3 Permanent Magnet Variable Frequency Multistage Stainless Steel Pump · data from the 2026 catalog and the model page.
- 75 m of head — the highest in the entire range, for high-rise and long-run boosting.
- 165 L/min maximum flow — the highest of any multistage pump in the range.
- Five power stages (0.55–1.5 kW), the widest power span of any model in the range.
- 100% stainless wetted path — body, impeller and shaft — with G 1.25-inch ports.
Holds energy saving at 60% or more versus a same-power conventional fixed-speed pump at the same flow/head duty point under constant-pressure conditions.
The specification confirmed for an order is the one stated in the order confirmation.
Technical data
Same fields, units and order for every model. Fields that are not published in the catalog are omitted.
Electrical
- Rated power
- 0.55 - 1.5 kW (5-stage adjustable)
- Power stages
- 5 adjustable power stages
- Power supply
- 170 - 260 V, 50/60 Hz
Hydraulic
- Maximum flow
- 165 L/min
- Maximum head
- 75 m
- Maximum suction lift
- 7 m
- Noise
- Water-cooled, fanless, low-noise operation
- Inlet
- G 1.25 in (32 mm)
- Outlet
- G 1.25 in (32 mm) (same as inlet)
Construction and environment
- Pump body and wetted parts
- Stainless steel · Ceramic shaft and bearing
- Motor type
- Permanent magnet motor with integrated variable frequency drive
- Liquid temperature range
- 5–70 °C, pH 6.5–8.5
- Ambient temperature range
- 0–40 °C, RH max. 85%
- Solids in the liquid
- No solid particles or fibres (smaller than 0.2 mm)
SCS100P-3 power stage data
Every value is taken from the 2026 catalog table for this model.
| Stage | Stage | Power (kW) | Power (HP) | Current (A) | Max flow (L/min) | Max head (m) | Suction (m) |
|---|---|---|---|---|---|---|---|
| Power 1 | 0.55 | 0.55 | 0.75 | 3.8 | 115 | 46 | 7 |
| Power 2 | 0.75 | 0.75 | 1.0 | 5.1 | 125 | 58 | 7 |
| Power 3 | 0.90 | 0.90 | 1.2 | 6.1 | 135 | 65 | 7 |
| Power 4 | 1.1 | 1.1 | 1.5 | 7.2 | 145 | 75 | 7 |
| Power 5 | 1.5 | 1.5 | 2.0 | 9.4 | 165 | 75 | 7 |
Performance curve
Head against capacity as published in the catalog, with metric axes.
Working conditions
Operating limits and media conditions published for this model.
- Pumped liquid
- Clean, thin, non-solidifying, non-flammable and non-explosive liquid
- Solids
- No solid particles or fibres (smaller than 0.2 mm)
- Max. working pressure
- 10 bar
- Liquid temperature
- 5–70 °C, pH 6.5–8.5
- Ambient temperature
- 0–40 °C, RH max. 85%
- Noise
- Water-cooled, fanless, low-noise operation
Overall dimension
All dimensions in millimetres unless stated otherwise. Dimension references Width a, Height b, Depth c, Port offset d, Port offset e are printed on catalog page 13.
| Model | Dimensions | Weight |
|---|---|---|
| SCS100P-3 |
|
Applications
High-rise and long-run boosting — the range's tallest head and largest multistage flow for multi-storey homes and small buildings.
- Villa & Multi-Storey Homes
- Rooftop Tank & Water Tower Boosting
- HVAC System
Installation notes
Points that apply to this model, from the catalog and the site installation guidance.
- Liquid condition: No solid particles or fibres (smaller than 0.2 mm).
Package
Packing information published for this model.
- Packing
- Carton with Plywood Tray
- Carton size
- 27 × 19.5 × 28 cm
Ordering information
Ordering information for the 2026 range.
- MOQ and packaging
- Minimum order quantity (MOQ): 50 units in kraft-paper cartons, with your brand label available. 300 units in color boxes, with the packaging layout designed entirely to your requirements.
- Lead time
- 30 days
- OEM / ODM
- Supported: custom voltage and frequency builds, own brand nameplate and rating labels, and adapted carton and shipping marks.
- Connection
- G 1.25 in (32 mm)
Warranty: 2 yearsWarranty and After-sales
Selection hints
How SCS100P-3 is positioned against the rest of the range.
- Choose SCS100P-3 when the duty needs up to 165 L/min at 75 m and the building has several outlets on one riser.
- Power 1 to Power 3 cover routine villa demand; Power 4 and Power 5 serve peak draw on multi-storey systems.
- Keep the suction lift within 7 m and the working pressure within 10 bar.
Power supply and CE marking
Statements that apply to the range, published so buyers can quote them in their own files.
Power supply and certification for this model are listed in the technical data above. The range carries the CE marking for sale in the European Economic Area; the technical file was verified by ECM, Certificate No. 0P230414.FMEUN01.
Downloads
Datasheet, performance curve and dimension data, generated from the catalog data on this page.
Datasheet
Model, key specifications, power stage data and packing details generated from the catalog data on this page.
Performance Curve
Head and flow curve for this model, redrawn from the catalog axis ranges.
Dimension Data
Dimension table for each model in the range, in millimetres and inches.
Working on an SCS100P-3 project? Send the duty point, market and volume and the export team will confirm the configuration.