2026 catalog · ICP SERIES
ICP100FPM VFD Smart Booster Pump
The ICP100F is built for houses whose water sits below the pump. Its 8 m self-priming lift draws from a cistern or shallow well, and its constant pressure can be set anywhere from 10 to 30 m to match the house. A single 0.75 kW permanent magnet stage delivers 86 L/min at up to 38 m of head through 1-inch ports, with a cast-iron body and a plastic impeller. Intelligent fault diagnosis alarms and self-checks, and dry-run and overload protection guard the pump when the source runs low.
- Rated power
- 0.75 kW (1.0 HP)
- Maximum flow
- 5.2 m³/h (22.7 GPM)
- Maximum head
- 38 m (125 ft)
- Power supply
- 170 - 250 V, 50/60 Hz
- Catalog page
- Page 11
Key benefits
ICP100F PM VFD Smart Booster Pump · data from the 2026 catalog and the model page.
- 8 m self-priming lift — draws from a cistern or shallow well below the pump, where non-priming boosters cannot work.
- Constant pressure settable from 10 to 30 m, so the outlet pressure is chosen for the house, not fixed by the pump.
- 86 L/min at up to 38 m of head from a single 0.75 kW stage, through 1-inch ports.
- Cast-iron body with dry-run and overload protection, drawing from a tank or a well at 8 m of suction.
Cuts energy use by 60% or more against a same-power conventional fixed-speed pump at the same flow/head duty point under constant-pressure conditions.
The specification confirmed for an order is the one stated in the order confirmation.
Technical data
Same fields, units and order for every model. Fields that are not published in the catalog are omitted.
Electrical
- Rated power
- 0.75 kW (1.0 HP)
- Power supply
- 170 - 250 V, 50/60 Hz
Hydraulic
- Maximum flow
- 5.2 m³/h (22.7 GPM)
- Maximum head
- 38 m (125 ft)
- Maximum working pressure
- 10 bar (145 psi)
- Maximum suction lift
- 8 m (26 ft)
- Inlet
- 1 in (25 mm)
- Outlet
- 1 in (25 mm) (same as inlet)
Construction and environment
- Motor type
- Permanent magnet motor with integrated variable frequency drive
- Liquid temperature range
- 5 - 70 °C, pH 6.5 - 8.5
- Ambient temperature range
- 0 - 40 °C, humidity up to 85%
- pH range
- pH 6.5 - 8.5
- Solids in the liquid
- No particles or fibres larger than 0.2 mm
- Pumped liquid
- Thin, clean, non-solidifying, non-flammable liquid
Model data
Values as published in the catalog table for this model range.
| Model | Power (kW) | HP | Current (A) | Qmax (L/min) | Hmax (m) | Suction (m) |
|---|---|---|---|---|---|---|
| ICP100F | 0.75 | 1.0 | 3.8 | 86 | 38 | 8 |
Performance curve
Head against capacity as published in the catalog, with metric and imperial axes.
Q-H grid data
| Series | 0 L/min (0 m³/h) | 13 L/min (0.8 m³/h) | 22 L/min (1.3 m³/h) | 34 L/min (2 m³/h) | 47 L/min (2.8 m³/h) | 60 L/min (3.6 m³/h) | 75 L/min (4.5 m³/h) | 87 L/min (5.2 m³/h) |
|---|---|---|---|---|---|---|---|---|
| H (m) | 38 m (125 ft) | 36 m (118 ft) | 34 m (112 ft) | 32 m (105 ft) | 29 m (95 ft) | 24 m (79 ft) | 18 m (59 ft) | 10 m (33 ft) |
Overall dimension
All dimensions in millimetres unless stated otherwise. Dimension references Overall length, Overall height, Base width, Port height are printed on catalog page 11.
| Model | Dimensions | Weight |
|---|---|---|
| ICP100F |
| 8.0 kg |
Applications
Tank and well supply where the water source sits below the pump — houses on cisterns, shallow wells and rooftop tanks.
- Rooftop Tank & Water Tower Boosting
- Whole-House Boosting
- Villa & Multi-Storey Homes
Installation notes
Points that apply to this model, from the catalog and the site installation guidance.
- Liquid condition: No particles or fibres larger than 0.2 mm.
Package
Packing information published for this model.
- Packing
- Carton with plywood tray
- Carton size
- 29.7 × 17.9 × 30.8 cm
- Net weight
- 8.0 kg
Ordering information
Ordering information for the 2026 range.
- MOQ and packaging
- Minimum order quantity (MOQ): 50 units in kraft-paper cartons, with your brand label available. 300 units in color boxes, with the packaging layout designed entirely to your requirements.
- Lead time
- 30 days
- OEM / ODM
- Supported: custom voltage and frequency builds, own brand nameplate and rating labels, and adapted carton and shipping marks.
- Connection
- 1 in (25 mm)
Warranty: 2 yearsWarranty and After-sales
Power supply and CE marking
Statements that apply to the range, published so buyers can quote them in their own files.
Power supply and certification for this model are listed in the technical data above. The range carries the CE marking for sale in the European Economic Area; the technical file was verified by ECM, Certificate No. 0P230414.FMEUN01.
Downloads
Datasheet, performance curve and dimension data, generated from the catalog data on this page.
Datasheet
Model, key specifications, power stage data and packing details generated from the catalog data on this page.
Performance Curve
Head and flow curve for this model, redrawn from the catalog axis ranges.
Dimension Data
Dimension table for each model in the range, in millimetres and inches.
Working on an ICP100F project? Send the duty point, market and volume and the export team will confirm the configuration.