2026 catalog · ICP SERIES
ICP106FPM VFD Smart Booster Pump
The ICP106F takes the ICP100F formula one step further: the same 0.75 kW stage and 86 L/min, but 42 m of head instead of 38 m, and a 9 m suction lift — the deepest suction of any pump in the range. It is the model for sources that sit lower than other boosters can reach. Constant pressure is settable from 10 to 30 m, the cast-iron body holds a plastic impeller, and the 9.8 kg unit runs on 170–250 V with fault diagnosis, alarm and self-check built in.
- Rated power
- 0.75 kW (1.0 HP)
- Maximum flow
- 5.2 m³/h (22.7 GPM)
- Maximum head
- 42 m (138 ft)
- Power supply
- 170 - 250 V, 50/60 Hz
- Catalog page
- Page 12
Key benefits
ICP106F PM VFD Smart Booster Pump · data from the 2026 catalog and the model page.
- 9 m suction lift — the deepest in the range, reaching sources 8 m models cannot.
- 42 m of head at the same 0.75 kW and 86 L/min as the ICP100F, for taller houses on the same supply.
- Constant pressure settable from 10 to 30 m, matched to the house rather than fixed by the pump.
- Cast-iron body with dry-run and overload protection, reaching sources 9 m below the pump.
Delivers the same duty with 60% or more less energy than a same-power conventional fixed-speed pump at the same flow/head duty point under constant-pressure conditions.
The specification confirmed for an order is the one stated in the order confirmation.
Technical data
Same fields, units and order for every model. Fields that are not published in the catalog are omitted.
Electrical
- Rated power
- 0.75 kW (1.0 HP)
- Power supply
- 170 - 250 V, 50/60 Hz
Hydraulic
- Maximum flow
- 5.2 m³/h (22.7 GPM)
- Maximum head
- 42 m (138 ft)
- Maximum working pressure
- 10 bar (145 psi)
- Maximum suction lift
- 9 m (30 ft)
- Inlet
- 1 in (25 mm)
- Outlet
- 1 in (25 mm) (same as inlet)
Construction and environment
- Motor type
- Permanent magnet motor with integrated variable frequency drive
- Liquid temperature range
- 5 - 70 °C, pH 6.5 - 8.5
- Ambient temperature range
- 0 - 40 °C, humidity up to 85%
- pH range
- pH 6.5 - 8.5
- Solids in the liquid
- No particles or fibres larger than 0.2 mm
- Pumped liquid
- Thin, clean, non-solidifying, non-flammable liquid
Model data
Values as published in the catalog table for this model range.
| Model | Power (kW) | HP | Current (A) | Qmax (L/min) | Hmax (m) | Suction (m) |
|---|---|---|---|---|---|---|
| ICP106F | 0.75 | 1.0 | 3.8 | 86 | 42 | 9 |
Performance curve
Head against capacity as published in the catalog, with metric and imperial axes.
Q-H grid data
| Series | 0 L/min (0 m³/h) | 13 L/min (0.8 m³/h) | 22 L/min (1.3 m³/h) | 34 L/min (2 m³/h) | 47 L/min (2.8 m³/h) | 60 L/min (3.6 m³/h) | 75 L/min (4.5 m³/h) | 87 L/min (5.2 m³/h) |
|---|---|---|---|---|---|---|---|---|
| H (m) | 42 m (138 ft) | 40 m (131 ft) | 38 m (125 ft) | 36 m (118 ft) | 33 m (108 ft) | 28 m (92 ft) | 22 m (72 ft) | 14 m (46 ft) |
Overall dimension
All dimensions in millimetres unless stated otherwise. Dimension references Overall length, Overall width, Overall height, Port offset are printed on catalog page 12.
| Model | Dimensions | Weight |
|---|---|---|
| ICP106F |
| 9.8 kg |
Applications
Deep-well and low-tank supply where 8 m of suction is not enough — the 9 m lift reaches sources other home boosters cannot.
- Villa & Multi-Storey Homes
- Rooftop Tank & Water Tower Boosting
- Whole-House Boosting
Installation notes
Points that apply to this model, from the catalog and the site installation guidance.
- Liquid condition: No particles or fibres larger than 0.2 mm.
Package
Packing information published for this model.
- Packing
- Carton with plywood tray
- Carton size
- 32.5 × 23.5 × 34.5 cm
- Net weight
- 9.8 kg
Ordering information
Ordering information for the 2026 range.
- MOQ and packaging
- Minimum order quantity (MOQ): 50 units in kraft-paper cartons, with your brand label available. 300 units in color boxes, with the packaging layout designed entirely to your requirements.
- Lead time
- 30 days
- OEM / ODM
- Supported: custom voltage and frequency builds, own brand nameplate and rating labels, and adapted carton and shipping marks.
- Connection
- 1 in (25 mm)
Warranty: 2 yearsWarranty and After-sales
Power supply and CE marking
Statements that apply to the range, published so buyers can quote them in their own files.
Power supply and certification for this model are listed in the technical data above. The range carries the CE marking for sale in the European Economic Area; the technical file was verified by ECM, Certificate No. 0P230414.FMEUN01.
Downloads
Datasheet, performance curve and dimension data, generated from the catalog data on this page.
Datasheet
Model, key specifications, power stage data and packing details generated from the catalog data on this page.
Performance Curve
Head and flow curve for this model, redrawn from the catalog axis ranges.
Dimension Data
Dimension table for each model in the range, in millimetres and inches.
Working on an ICP106F project? Send the duty point, market and volume and the export team will confirm the configuration.